Maytag washing machines are manufactured in a range of models, each with a different set of features and modes of washing. The drive belt is an integral component in all models. The belt connects the motor pulley system to control the movement of the tub and the agitator. If the belt is too loose or too tight, the machine may not be able to function properly. Adjust the strap to keep the Maytag washing machine running efficiently.
You will need
- Box spanner
- Phillips
Instructions
- Unplug the power cord from the electrical outlet.
- Remove the screws from the base of the front panel. Lift the bottom of the front panel away from the Maytag washer to disconnect from the spring clips on the top of the panel.
- Place the front panel aside to expose the motors, pulleys and belt.
- Washing machine tilts rearwardly so that the upper part rests on the wall and the bottom of the machine can be accessed.
- Loosen the motor mounting bolts with the socket wrench.
- The motor moves forward or backward to adjust the belt tension as required.
- Tighten the mounting bolts of the engine when the belt is tight.
- Place the washer on its feet. Replace the front panel. Install the two screws holding the panel in place.